Do it yourself
| ||||
|
Mercedes Classe B - Video tutorial
Model: Mercedes Classe B
MK 1, W245
- Years 2005-2011 Engine oil replacement on Mercedes B? Let's see how it replaces. We lift the car on a column or jack bridge, unscrew the oil pan pin with a socket wrench (remove the protective plastic panel if necessary), drain the liquid into a container for disposal and screw the pin back on of the cup. After removing the oil from the engine, we bring the car to the ground and lift the engine hood, let's put it in safety. Unscrew the filter located inside the engine compartment with a socket wrench. We top up the engine with the new liquid. We measure the oil level with the metal dipstick several times until the ideal is reached. We close the front hood.
Posted on 13 December 2023 by ScegliAuto
How to change the gearbox oil of the Mercedes B-Class?
Mercedes Classe B (2005-2011 / MK 1, W245) .. to change the gearbox oil of the Mercedes B-Class you have to go and lift the car, so that you can have access to the components in the lower part..
How do you change the automatic transmission oil on your Mercedes B-Class?
Mercedes Classe B (2005-2011 / MK 1, W245) .. in the automatic transmission of the Mercedes B-Class, you need to lift the car, so that you can access the components in the lower part of the engine..
How do you replace the gearbox oil on a Mercedes B-Class?
Mercedes Classe B (2005-2011 / MK 1, W245) .. gearbox oil change operation on the Mercedes B-Class is carried out by lifting the car, so that you can access the components in the lower part of the.. Other guides that may interest you
|
Frequently Asked QuestionsHow to reset the oil service in the Fiat Toro?In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.049
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |