Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Classe C
    4. : How to change the wipers of the Mercedes C-Class

Mercedes Classe C - Video tutorial

Model: Mercedes Classe C W205 - Years 2014-2021
Part: Windscreen wipers
Operation: How to change the wipers of the Mercedes C-Class

Change the wiper blades from above on the Mercedes C? Nothing simpler, let's see. We open the front hood and put it in safety, take the front brush (to be replaced) with our hands, pull the movable brush as in the video and slide it off the movable arm. We mount the new brush on the arm (if the brush is not original we have to detach the piece as shown in the video), we will hear a hooking tack. Finally we lower the wiper arm on the windshield and carry out the same operation on the second blade. At the end of the assembly we lower the hood and carry out a test.


Posted on 22 December 2023 by ScegliAuto

    Frequently Asked Questions

    • Classe C 2014-2021 - What to do when the windshield wiper of the Mercedes C-Class is not working? Read Answer
    • Classe C 2014-2021 - What is the windshield fuse on Mercedes C-Class? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos