Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Spark Plugs on Mercedes C-Class

Model: Mercedes Classe C W203 - Years 2000-2007
Part: Spark plugs

Open the hood and insert the support rod. Remove the outermost part (let's say the front) of the engine cover: it is simply held in place by four clips, so just shake it a bit to pull it out. Remove the two side ducts by loosening them slightly and pulling them off, as shown in the video. This will allow you to remove the rest of the engine cover. Disconnect the spark plug connectors. Using a T30 Torx wrench, remove the screws that secure the box connected to the spark plugs, then use a 16 mm socket to remove the spark plugs.

Updated on 2 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing Spark Plugs on a Mercedes C-Class
Replacing Spark Plugs on a Mercedes C-Class
Mercedes Classe C (2000-2007 / W203) .. Replacing damaged spark plugs on a Mercedes C-Class? Let's see how to remove the spark plugs. Open and lift the hood, then remove the soundproofing.. …
How to Replace Glow Plugs in a Mercedes C-Class?
How to Replace Glow Plugs in a Mercedes C-Class?
Mercedes Classe C (2000-2007 / W203) .. how to replace the glow plugs in a Mercedes C-Class, a very simple operation. Before proceeding, ensure the engine is cool enough. Start by opening.. …
Replace the Glow Plugs on a Mercedes C-Class
Replace the Glow Plugs on a Mercedes C-Class
Mercedes Classe C (2000-2007 / W203) .. How to replace the glow plugs on a Mercedes C-Class? First, lift the hood to access the engine compartment. Remove the engine cover panel and locate.. …

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos