Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Spark Plug Replacement Instructions

Model: Mercedes Slk MK 1, R170 - Years: 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004
Part: Spark plugs

See other generations:
Video tutorial

It is advisable to carry out this maintenance with the engine cold. Open the bonnet and remove the red plastic cover on top of the engine; disconnect the connectors attached to the ignition coils, undo the respective securing screws, and extract the leads complete with coil from their positions on the right and left.

Then, undo the old spark plugs and remove them from their seats; insert the new ones by hand until fully seated and then tighten them without exceeding the torque. Reattach the leads with the coils and the other leads, tightening the various screws while paying attention to their respective positions.

Finally, refit the cover.


Updated on 6 February 2026 by ScegliAuto


Related tutorials

Spark Plug Replacement Instructions
Spark Plug Replacement Instructions
Mercedes Slk (1997-2004 / MK 1, R170) It is recommended to carry out this maintenance with a cold engine as you will need to handle particularly hot components during normal engine operat…
How to Replace the Spark Plugs on Your Mercedes SLK
How to Replace the Spark Plugs on Your Mercedes SLK
Mercedes Slk (1997-2004 / MK 1, R170) Do you want to replace the spark plugs fitted in the cylinder head of a Mercedes SLK? Let's see how to do this. Pull the lever to open the engine com…
How to repair or replace the window motor of the Mercedes SLK
Mercedes Slk (1997-2004 / MK 1, R170) Below we will see the instructions that will allow us to carry out the repair or replacement of the window motor of the Mercedes SLK. First, we open …

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos