Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Classe C
    4. : How to replace the petrol pump of a Mercedes C-Class

Mercedes Classe C - Video tutorial

Model: Mercedes Classe C W203 - Years 2000-2007
Part: Fuel pump
Operation: How to replace the petrol pump of a Mercedes C-Class

Before we can start, we will have to go to lift the bench of the rear seats and remove the cover placed under the bench of our Mercedes C-Class. remove the cover itself. After that, we will have to unscrew and remove the ring nut that holds the fuel pump in place. At this point, we will be able to remove the internal cover of the fuel pump, and we will have reached the fuel pump itself. We then proceed by disconnecting the relative electrical connector, and then extracting the pump from its housing. When we have completed this step, we will have successfully completed the disassembly. To fit the new pump, we will just have to follow these simple instructions in reverse, and the replacement will be completed.


Posted on 13 January 2024 by ScegliAuto

    Frequently Asked Questions

    • Classe C 1983-1993 - Where is the fuel pump located on a Mercedes 190? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos