Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Battery in Mercedes A-Class

Model: Mercedes Classe A W176 - Years 2012-2018
Part: Battery

Today, you will learn how to remove and replace the battery in a Mercedes A-Class. First, open and lift the hood by pulling the lever from inside, and remove the plastic battery cover. Next, disconnect the two terminals (positive and negative) using a socket wrench, and pull out the terminal block along with the control unit. At this point, you can remove the battery by pulling it upward and replace it with a new one (with the same amperage). Finally, reinstall everything by following the reverse procedure, and watch the video until the end!

Updated on 7 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Battery in a Mercedes A-Class
Replacing the Battery in a Mercedes A-Class
Mercedes Classe A (2004-2012 / W169) .. and replacing the battery in a Mercedes A-Class. First, get inside the vehicle on the front passenger side and start by removing the cover located.. …
Replacing the Battery in a Mercedes A-Class Key
Replacing the Battery in a Mercedes A-Class Key
Mercedes Classe A (2004-2012 / W169) .. see how to replace the battery in a Mercedes A-Class key (this applies to many other models from the same manufacturer as well). The first step is to.. …
How to Replace the Battery in a Mercedes A-Class
How to Replace the Battery in a Mercedes A-Class
Mercedes Classe A (2012-2018 / W176) .. you begin, open the hood of your Mercedes A-Class. Start by removing the upper battery cover. Next, loosen the bolts securing the two terminals connected.. …

Other guides you may be interested in

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos