Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Classe A
    4. : How to disassemble the water pump of a Mercedes A-Class

Mercedes Classe A - Video tutorial

Model: Mercedes Classe A W169 - Years 2004-2012
Part: Pump
Operation: How to disassemble the water pump of a Mercedes A-Class

Before starting, we will have to open the front hood of our Mercedes A-Class. Let's start by loosening the belt tensioner of the services belt, and then remove the belt itself. After that, we will have to go and unscrew and remove the screws that secure the water pump to the engine block. By doing so, we will have freed the water pump itself. At this point, we will have to go and extract the water pump from its housing. When we have completed this last step, we will be able to permanently remove the water pump, and the disassembly will be finished.


Posted on 26 January 2024 by ScegliAuto

    Frequently Asked Questions

    • Classe A 2012-2018 - How much does the fuel pump for the Mercedes A-Class cost? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos