Do it yourself
| ||||
|
Mercedes Classe A - Video tutorial
Model: Mercedes Classe A
W169
- Years 2004-2012 Today's guide will show us the main steps on how to disassemble and replace the water pump of the Mercedes Class A, as well as the Class B. Firstly, we open the engine hood and begin to locate the water pump, which we find at the bottom left of the engine compartment; then we unscrew its fixing screws to remove it, letting the coolant drain into a container for about ten minutes. At this point, we proceed to inspect or directly replace the water pump with the original one, applying the reverse procedure for reassembly!
Posted on 13 June 2023 by ScegliAuto
Other guides that may interest you
|
Frequently Asked QuestionsHow to replace the Ford Transit key batteryBelow I will explain how to replace the remote control key battery on the car, take a small screwdriver and pry the rear part of the remote control, (where there is the ring), at which point unhook the back cover and yes will have access to the compartment containing the battery. Always with the help of the small screwdriver, proceed to make the va and lift the battery out of the housing. Then take the new battery (check the type) and place it on the housing, always making sure to position it with the positive pole facing upwards. Finally, close the back cover by re-hooking it to the key. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.026
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |