Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Center Console Switch Panel of a Mercedes E-Class

Model: Mercedes Classe E W210 - Years: 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002
Part: Checks and maintenance

See other generations:
Video tutorial

Before starting, sit in the driver's seat of your Mercedes E-Class. Begin by prying off and removing the shift lever trim.

Next, detach and lift the panel where all the center console buttons are located, then disconnect the various electrical connectors. Once you complete this step, you can fully remove the center console light panel from your Mercedes E-Class, completing the disassembly.

To install the new panel, simply follow these steps in reverse, and you will have completed the replacement.


Updated on 16 April 2026 by ScegliAuto


Related tutorials

How to Remove the Center Console of a Mercedes E-Class
Mercedes Classe E (2009-2016 / W212) .. trim panel of the center console of a Mercedes E-Class. Position the gear shift knob vertically. Then, use metal keys to remove the lower buttons from.. …
Removing the Center Console and Armrest Compartment
Mercedes Classe E (1995-2002 / W210) .. removing the center console of the Mercedes E-Class is really a piece of cake, doable with just your fingers while being careful of the few electrical.. …
Removing the Radio from a Mercedes E-Class
Removing the Radio from a Mercedes E-Class
Mercedes Classe E (2002-2009 / W211) .. Replace the radio in the Mercedes E-Class if you want to change it or if it is damaged. Remove the trim above the plastic center tunnel (where.. …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos