Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Door Lock from a Mercedes A-Class?

Model: Mercedes Classe A W169 - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Checks and maintenance

See other generations:
Video tutorial

To replace the door lock on a Mercedes A-Class, loosen the bolts securing the door panel and detach it, then disconnect all the cables. Next, insert a Torx key into the hole at the end of the door to remove a bolt that secures the lock.

By loosening this and other bolts on the inside and outside of the door (all shown in the tutorial), you can detach the inner part of the panel, which is connected to the lock. Finally, you can replace the lock and reinstall all the previously removed parts.


Updated on 20 April 2026 by ScegliAuto


Related tutorials

How to Remove the Exterior Lock on a Mercedes A-Class Door
How to Remove the Exterior Lock on a Mercedes A-Class Door
Mercedes Classe A (1997-2004 / W168) .. guide, remove the exterior lock on a Mercedes A-Class door. Insert a metal key into the slot on the door panel (remove the rubber plugs). Pull the lock.. …
Removing the Rear Door Lock of the Mercedes A-Class
Removing the Rear Door Lock of the Mercedes A-Class
Mercedes Classe A (1997-2004 / W168) .. and replace the rear door lock of the Mercedes A-Class. First, open the rear door (in this case, the removal is done with the door detached) and start.. …
How to Replace the Door Lock in a Mercedes A-Class?
How to Replace the Door Lock in a Mercedes A-Class?
Mercedes Classe A (2004-2012 / W169) .. To replace the door lock in a Mercedes A-Class, loosen the screws that secure the panel corresponding to its housing. By unscrewing these screws,.. …

    Frequently Asked Questions

    • Classe A 2012-2018 - Where is the exterior temperature sensor of the Mercedes A-Class located? Read answer
    • Classe A 2018-2026 - Where is the Mercedes A-Class jack located? Read answer

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos