Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Gla
    4. : How do you replace the spark plugs on the Mercedes GLA?

Mercedes Gla - Video tutorial

Model: Mercedes Gla W156, MK 1 - Years 2013-2019
Part: Spark plugs
Operation: How do you replace the spark plugs on the Mercedes GLA?

To be able to replace the spark plugs on the Mercedes GLA, you have to open the hood and remove the plastic cover from the top of the engine. Subsequently, the pipes that prevent access to the spark plugs must be disconnected; once removed, it will be possible to disconnect the coil and extract the spark plugs from their housing using a socket wrench. When all four candles have been extracted, it will be possible to go and insert the new spare parts. You will need to connect them to the coil and re-install the previously removed tubes and cover.


Posted on 13 March 2024 by ScegliAuto



Where is the OBD port located on the 2017 Mercedes GLA?
Mercedes Gla (2013-2019 / W156, MK 1) If you own a 2017 Mercedes GLA and want to find out where the OBD port is located to connect any compatible diagnostic tool, then all you have to do
How do you replace the windshield wipers on the Mercedes Gla?
Mercedes Gla (2013-2019 / W156, MK 1) For the replacement of the windshield wipers, we can take a look at this video guide, complete with commentary, which shows the whole procedure, whic
How to remove the front brake pads of a Mercedes GLA
Mercedes Gla (2013-2019 / W156, MK 1) Before we can begin, we will have to lift the front of our Mercedes GLA. So let's start by disassembling and removing the left front wheel, unscrewin

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos