Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Classe C
    4. : How to replace the pollen filter

Mercedes Classe C - Video tutorial

Model: Mercedes Classe C W203 - Years 2000-2007
Part: Cabin air filter
Operation: How to replace the pollen filter

Regularly changing the pollen filter on your car is very important because it protects against external agents that can enter the passenger compartment. It is advisable to replace it every 10,000 km or once a year. An activated carbon pollen filter has a higher cost than a simple filter but it also allows you to retain harmful substances from the exhaust gases of other vehicles. Replacing it is a fairly simple operation that does not take many minutes. As shown, the guide is positioned under the glove compartment. Once identified, it can be replaced making sure that the mounting direction follows the air flow.


Posted on 26 July 2023 by ScegliAuto

    Frequently Asked Questions

    • Classe C 2007-2013 - Where is the cabin air filter of the 2013 Mercedes C220 CDI coupe located? Read Answer
    • Classe C 2007-2013 - How much does the Mercedes C-Class 220 cabin air filter cost? Read Answer
    • Classe C 2007-2013 - Where is the air conditioning filter of the Mercedes CW 204 class? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos