Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Classe C
    4. : How to reset the automatic transmission in the Mercedes C-Class?

Mercedes Classe C - Video tutorial

Model: Mercedes Classe C W203 - Years 2000-2007
Part: Gearbox
Operation: How to reset the automatic transmission in the Mercedes C-Class?

In this tutorial we can see how to reset the automatic gearbox in the Mercedes C-Class. This operation can be carried out whenever we want to reset the gearbox settings automatically generated by the on-board computer, in order to start a new self-learning procedure. To do this, we insert the key and turn on the instrument panel, not the engine, then press the accelerator pedal fully for 15 seconds. Once these have elapsed, turn off the ignition without removing the key, release the pedal and wait at least two minutes before starting the vehicle.


Posted on 14 April 2024 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Classe C 2007-2013 - What is the problem with the automatic transmission of the Mercedes C-Class 220? Read Answer
    • Classe C 2007-2013 - What problems does the Mercedes C220 Class have? Read Answer
    • Classe C 2007-2013 - What to do if you have problems with your Mercedes C-Class W204 automatic gearbox? Read Answer
    • Classe C 2000-2007 - What to do in case of problems with the automatic transmission of the Mercedes C-Class W203? Read Answer
    • Classe C 2007-2013 - How to unlock the automatic gear lever of the Mercedes C-Class? Read Answer
    • Classe C 2007-2013 - What problems does the automatic transmission of the Mercedes C-Class have? Read Answer
    • Classe C 2000-2007 - How to perform automatic gearbox rest of the Mercedes C-Class? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos