Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Classe C
    4. : How to replace the headlight bulb on Mercedes C-Class W204

Mercedes Classe C - Video tutorial

Model: Mercedes Classe C W204 - Years 2007-2013
Part: Headlight bulb
Operation: How to replace the headlight bulb on Mercedes C-Class W204

Below we will find out together how to correctly and independently replace the headlight bulb in the Mercedes C-Class W204. Before listing the various necessary steps, make sure you have parked the car on a flat surface and preferably disconnect the battery so as to reduce any possible danger to your health. Once this is done, go to the wheel cover and remove the rubber pins present so as to have access to the rear area of the headlight. Then lift the front hood and proceed with the removal of all the front panels so that you can easily remove the headlight. Disconnect the latter from the connector and replace the defective bulb with a new one. Finally, reassemble everything correctly.


Posted on 15 April 2024 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos