Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Classe M
    4. : Service warning light reset-reset

Mercedes Classe M - Video tutorial

Model: Mercedes Classe M W163 - Years 1997-2005
Part: -board computer
Operation: Service warning light reset-reset

It is possible to reset the warning light relating to the SERVICE message manually. It is therefore advisable to first proceed with regular maintenance, i.e. by replacing the engine oil and the relative filter, and then proceed with resetting the warning light. This resetting is done using the reset button for partial kilometers. Press and hold the reset button for partial kilometers and turn on the panel: the service warning light will appear and after a single flash it will disappear; then turn off the ignition and check that the light remains off the next time you turn it on.


Posted on 27 July 2023 by ScegliAuto



Instructions for resetting the service light
Mercedes Classe M (1997-2005 / W163) .. To reset the SERVICE warning light on the instrument panel it is necessary to have a diagnostic tool, also..
How to reset the service light on the Mercedes W164 ML
Mercedes Classe M (2005-2011 / W164) .. this or if you want to postpone it, you need to reset it manually. To do this you must follow the instructions in this mini guide. First insert the key..
How to reset the service indicator on a Mercedes ML
Mercedes Classe M (2005-2011 / W164) .. In this video, we see how to reset the service light on a 2009 Mercedes ML. After performing the scheduled service, we turn on the..

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos