Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Radio in a Mercedes A-Class?

Model: Mercedes Classe A W169 - Years 2004-2012
Part: Car stereo

To replace the radio in a Mercedes A-Class, remove the plastic panel located below the radio and above the climate control buttons. Once removed, detach the air vent grille to access the screws underneath. By loosening these screws and those at the bottom of the radio, you can extract the radio from its housing, disconnecting the connectors at the back. This allows you to connect the new radio, insert it into its place, and reattach the previously removed plastic panels.

Updated on 17 May 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

How to Remove and Replace the Factory Radio on the Mercedes A-Class W169
How to Remove and Replace the Factory Radio on the Mercedes A-Class W169
Mercedes Classe A (2004-2012 / W169) .. and replace the factory radio on the Mercedes A-Class W169 in this brief and simple guide. First, get inside the car and pry on the sides of the air.. …
How to remove the car radio from the Mercedes Class A W169
How to remove the car radio from the Mercedes Class A W169
Mercedes Classe A (2004-2012 / W169) .. remove the factory car radio in your Mercedes Class A W169, you must follow the steps described below. First, go inside the car and make sure it is.. …
How to Remove the Factory Radio from a Mercedes A-Class
How to Remove the Factory Radio from a Mercedes A-Class
Mercedes Classe A (1997-2004 / W168) .. you remove the factory radio from a Mercedes A-Class? Watch this video closely to see how to perform the removal following the guide. Use the original.. …

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos