Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing and Replacing Engine Air Filter

Model: Mercedes Sprinter MK 2, W906 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Air filter

See other generations:
This video is currently unavailable

This video illustrates the various procedures for removing and replacing the engine air filter of your car. First, open the bonnet and locate the box containing the air filter; once located, proceed to remove it by disconnecting the connected connectors, unscrewing the attached screws, and loosening the clamps securing the air ducts.

Once done, open the filter box and check the condition of the air filter; if replacement is necessary, extract it and clean the housing before installing a new one.


Updated on 11 February 2026 by ScegliAuto


Related tutorials

Removal and Replacement of the Diesel Filter
Mercedes Sprinter (1995-2006 / MK 1, W901) This video shows how to remove and replace the diesel filter on your car. First, locate the housing of the filter and proceed to remove the inlet and…
How to Replace the Air Filter on a Mercedes Sprinter?
How to Replace the Air Filter on a Mercedes Sprinter?
Mercedes Sprinter (2018-2026 / Br907, Br910, MK 3) To replace the air filter on a Mercedes Sprinter, first ensure the engine is cold. Locate the air filter box under the bonnet, at the top of the engi…
Replacement of Diesel Fuel Filter
Replacement of Diesel Fuel Filter
Mercedes Sprinter (1995-2006 / MK 1, W901) To replace this filter, obtain the new complete replacement component. Replacing the fuel filter is a straightforward task that should be done regula…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos