Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Classe C
    4. : Layout and location of the Mercedes C-Class fuse boxes

Mercedes Classe C - Video tutorial

Model: Mercedes Classe C W204 - Years 2007-2013
Part: Air conditioning
Operation: Layout and location of the Mercedes C-Class fuse boxes

Let's see in this short and simple guide, the layout and positioning of the fuse boxes of the Mercedes C-Class, following the instructions below. First of all we open the front door, on the driver's side, and begin to remove the plastic cover that we find to the left of the steering wheel, thus accessing the internal fuse box; the diagram of the fuses is shown in the guide, associated with a code and relative amperage. Instead we find the external fuse box on the engine compartment, removing the plastic cover; There is also an additional fuse box in the luggage compartment!


Posted on 23 June 2022 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Classe C 2000-2007 - What problems are there with the air conditioning in the Mercedes C-Class? Read Answer
    • Classe C 2007-2013 - What ventilation problem on the Mercedes C-Class? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos