Do it yourself
Frequently asked questions about cars and motorcycles

How to Reset the Airbag Light on a Mercedes SLK

Model: Mercedes Slk MK 2, R171 - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Warning light – error code

See other generations:
Video tutorial

In this video tutorial, you can see how to reset the passenger airbag light on a 2004 Mercedes SLK. Airbags are crucial for the safety of the driver and can be activated or deactivated, but caution is necessary. This activation or deactivation of the passenger airbag can be checked via warning lights (?PASSENGER AIR BAG ON? and ?PASSENGER AIR BAG OFF?). When you press the start/stop button once or twice, the system performs a self-check.

The ?PASSENGER AIR BAG ON? light may illuminate for about 60 seconds, indicating that the passenger airbag can activate in the event of an accident. Alternatively, the ?PASSENGER AIR BAG OFF? light may illuminate, indicating that the passenger airbag is deactivated and will not activate in the event of an accident.

To reset the airbag light if it has illuminated, you need to connect a diagnostic device via cable to your vehicle and follow the reset procedure as shown in the video.


Updated on 19 June 2026 by ScegliAuto


Related tutorials

Mercedes Slk (2011-2016 / R172, MK 3) To reset the Service light on a Mercedes SLK, turn on the ignition by inserting the key into the ignition switch. Once the dashboard lights up, press…
Mercedes Slk (2004-2011 / MK 2, R171) To reset the Service light on the Mercedes SLK, turn on the ignition by turning the key in the ignition switch. Once it is on, press and hold the but…
Mercedes Slk (2004-2011 / MK 2, R171) Today's video will demonstrate the procedure required to reset the engine warning light on the Mercedes SLK. Before performing the reset, it is neces…

    Frequently Asked Questions

    • Slk 1997-2004 - What warning lights are there in the dashboard of the Mercedes SLK? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos