Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the Alternator Fuse Located in the Mercedes A-Class?

Model: Mercedes Classe A W176 - Years 2012-2018
Part: Alternator

In this video, you can see where the alternator fuse is located in the Mercedes A-Class, which is the first component to check in case of sudden malfunction of the device. As shown, the fuse is located in the box inside the engine compartment, near the battery, and is positioned right at the positive terminal support. To access it, you will need to remove part of the terminal following the instructions provided in the video. If it is faulty, make sure to replace it with a spare that has the same specifications, 300A, and always operate with the vehicle turned off.

Updated on 21 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to disassemble the alternator of the Mercedes A-Class 180
How to disassemble the alternator of the Mercedes A-Class 180
Mercedes Classe A (2012-2018 / W176) .. and replacing the alternator of the Mercedes Class A 180. First, we open the car's engine hood and start disconnecting and removing the alternator.. …
Where is the fuse box of the Mercedes A-Class located?
Mercedes Classe A (2004-2012 / W169) .. The Mercedes A-Class has two fuse boxes inside. The first fuse box is located inside the cabin, specifically behind.. …
Replace Alternator on Mercedes A-Class
Replace Alternator on Mercedes A-Class
Mercedes Classe A (1997-2004 / W168) .. Remove the alternator from the Mercedes A-Class if it is faulty. Here’s how to do it. Disconnect the battery terminals. Lift the vehicle on a c.. …

Other guides you may be interested in

How to reset the tyre pressure warning light on a Hyundai Tucson

Below are the instructions to reset the tyre pressure warning light (TPMS) on a Hyundai Tucson. First, get into the vehicle and turn on the instrument cluster; then navigate to the vehicle settings until you reach the tyre pressure monitor, identifying the tyre with incorrect pressure. At this point, restore all tyre pressures according to the specifications indicated on the label; this will reset the TPMS and the warning light will be cleared from the instrument cluster!

Watch the video!


by ScegliAuto

More videos