Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Front Headlight Bulb

Model: Mercedes Clk A208, W208, C208 - Years 1997-2003
Part: Light bulb

Once the bonnet is open, there is enough space behind the headlights to proceed with replacing the bulbs; start by removing the protective cap of the bulb holder by turning it anti-clockwise, disconnect the power connector of the bulb itself, and release the retaining spring. Then extract the old bulb and insert the new one, orienting it correctly to fit it into its housing, secure it by attaching the rear spring, and finally reconnect the power connector and the protective cap to seal everything.

Updated on 14 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Front Indicator Bulb
Replacing the Front Indicator Bulb
Mercedes Clk (1997-2003 / A208, W208, C208) The front indicator bulb is integrated within the headlamp and replacing it is fairly simple, but it is necessary to remove the air filter housing fo…
How to Replace the Front Headlight Bulb on the Mercedes CLK
How to Replace the Front Headlight Bulb on the Mercedes CLK
Mercedes Clk (2002-2010 / W209, A209, C209) .. Replacing the front headlight bulb on a 2007 Mercedes CLK is a very simple task that you can perform.. …
Replacing the Front Headlamp Bulb
Replacing the Front Headlamp Bulb
Mercedes Clk (1997-2003 / A208, W208, C208) Open the bonnet and locate the position of the headlamp bulb to be replaced. Once located, simply rotate the cover counterclockwise to unscrew it. Re…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos