Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Key Fob Battery of a Mercedes A-Class

Model: Mercedes Classe A W177 - Years 2018-2026
Part: Key

This short video guide shows the steps necessary to replace the battery in the remote of a fourth-generation Mercedes A-Class. Start by removing the metal emergency key by pressing the release button located on the back of the remote. Then, use the removed key to help detach the back cover of the remote. After that, remove the battery cover as shown in the video, and finally, take out the old battery and install a new one, then close everything up. The required battery is a CR2032 3V.

Updated on 1 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Key Battery of a Mercedes A-Class
How to Replace the Key Battery of a Mercedes A-Class
Mercedes Classe A (2004-2012 / W169) .. at the top of the key fob for your Mercedes A-Class, which will open the physical key. Next, you need to pry off and remove the back cover of the key... …
How to Change the Key Battery on a Mercedes A-Class
How to Change the Key Battery on a Mercedes A-Class
Mercedes Classe A (2012-2018 / W176) .. Is the key battery on your Mercedes A-Class dead? Here’s how to change it. Take your remote key, and using a screwdriver, pry apart the rear p.. …
How to Replace the Key Fob Battery for a Mercedes A-Class
How to Replace the Key Fob Battery for a Mercedes A-Class
Mercedes Classe A (2012-2018 / W176) .. the battery in the key fob for a Mercedes A-Class is very simple. Take the key fob and slide the small lever on the bottom edge of the case. This.. …

Other guides you may be interested in

    Frequently Asked Questions

    • Classe A 2012-2018 - Why is my Mercedes A-Class W176 key not recognized? Read answer

How to Remove the Front Bumper of the Citroën C4 Picasso?

To remove the front bumper of the Citroën C4 Picasso, you need to take out all the rivets and screws that secure the piece to its housing: these screws are located inside the wheel arches of the front wheels and at the central upper part of the bumper itself. Once all these fastening elements have been removed, you can detach the bumper from its seat by disconnecting the connectors inside and then insert the new replacement part. The new part can then be secured and connected properly, ensuring it is correctly fixed in place.

Watch the video!


by ScegliAuto

More videos