Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Classe C
    4. : ABS control unit replacement instructions

Mercedes Classe C - Video tutorial

Model: Mercedes Classe C W203 - Years 2000-2007
Part: Control unit
Operation: ABS control unit replacement instructions

The anti-blocking system, better known by the acronym ABS (from the English Antiblock Braking System or from the German Antiblockiersystem) is a safety system that prevents the wheels of vehicles from locking, guaranteeing driveability during braking. It is obviously managed by an electronic control unit that commands the opening and closing of the solenoid valves that govern the braking system; this control unit is located in the front right part of the engine compartment (looking from the front), immediately behind the headlight; then disconnect the power socket by extracting the safety catch by sliding it like a drawer and unscrewing the relative fixing screws; proceed in reverse for installation.


Posted on 21 August 2023 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Classe C 2000-2007 - What to do when there is a problem with the ESP control unit on the Mercedes C-Class w203? Read Answer
    • Classe C 2000-2007 - Where is the Mercedes C-Class airbag control unit located? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos