Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Light Switch Controls

Model: Mercedes Slk MK 1, R170 - Years: 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004
Part: Dashboard

See other generations:
Video tutorial

To replace the controls for the wipers, indicators, etc., commonly known as the light switch, you first need to remove the airbag and then the steering wheel; at this point, remove the so-called slip ring (or spiral group or airbag ribbon), which contains a flat cable spiral and must not be rotated to avoid damage; once this ring is removed, you can take off the control lever support and replace it with the new one; then reverse the process by installing the spiral group and then the steering wheel and airbag.


Updated on 17 February 2026 by ScegliAuto


Related tutorials

Resetting the Onboard Computer After Oil Change
Resetting the Onboard Computer After Oil Change
Mercedes Slk (1997-2004 / MK 1, R170) The onboard computer located in front of the dashboard of our car indicates everything we need to know, such as when to change the oil. Once the oper…
How to replace the air conditioning controls of the Mercedes SLK with digital ones
How to replace the air conditioning controls of the Mercedes SLK with digital ones
Mercedes Slk (2011-2016 / R172, MK 3) In this video we see how to change the control panel of the air conditioner of the Mercedes SLK with a digital one. From a search, this type of devic…
How to Remove the Interior Door Panel on a Mercedes SLK R170
How to Remove the Interior Door Panel on a Mercedes SLK R170
Mercedes Slk (1997-2004 / MK 1, R170) As shown in the video, one reason for removing the interior panel of a door is for the repair or replacement of the door itself. The procedure is alm…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos