Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Cabin Air Filter

Model: Mercedes Clk A208, C208, W208 - Years: 1997, 1998, 1999, 2000, 2001, 2002, 2003
Part: Cabin air filter

See other generations:
Video tutorial

The cabin air filter is located on the passenger side, just below the glove compartment. To access the air duct, remove a trim panel by unscrewing the relevant fastening screws.

Once the panel is removed, slide the retaining tabs of the cover protecting the cabin air filter outward and extract the filter by slightly rotating it. Install the new filter (it is recommended to choose one with activated carbon) orienting it according to the direction of airflow, then reposition the cover and the panel.


Updated on 17 February 2026 by ScegliAuto


Related tutorials

Replacing the Cabin Air Filter
Replacing the Cabin Air Filter
Mercedes Clk (2002-2010 / A209, C209, W209) .. in its place and reattach the metal tabs. When replacing the cabin air filter, it is recommended to sanitise the cabin using a suitable germicidal spray... …
Replacing the Cabin Air Filter
Replacing the Cabin Air Filter
Mercedes Clk (1997-2003 / A208, C208, W208) The cabin air filter is located on the passenger side, just below the glove compartment. First, remove the three screws securing the soundproof cover…
Replacing the Cabin Air Filter on a Mercedes CLK
Replacing the Cabin Air Filter on a Mercedes CLK
Mercedes Clk (1997-2003 / A208, C208, W208) The instructions in this guide will show you the procedure to replace the cabin air filter on a Mercedes CLK. First, get inside the vehicle and start…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos