Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Stabilizer Bar Bushings on the Mercedes W214

Model: Mercedes Classe E W124 - Years: 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995
Part: Anti-roll bar

See other generations:
Video tutorial

Replacing the stabilizer bar bushings on the Mercedes W214, E-Class model, is a relatively simple maintenance task, although it takes some time. Start by lifting the vehicle and then remove the mounting brackets for the stabilizer bushings.

Once the entire piece is removed, clean the mounting seats for the stabilizer bushings and disassemble everything. Clean the brackets for the stabilizer bar bushings and remove them.

Now proceed to install the new bushing support and stabilizer bushing, as shown in the video. Finally, tighten the fasteners on the bushing brackets and lower the car off the jack stands.


Updated on 30 July 2026 by ScegliAuto


Related tutorials

Where is the Engine Fuse Box in the Mercedes E-Class W214?
Where is the Engine Fuse Box in the Mercedes E-Class W214?
Mercedes Classe E (2023-2026 / W214) If you need to access the engine fuses in your Mercedes E-Class W214 but don't know where the fuse box is located, follow the procedure described bel…
How to replace the battery of the key for the Mercedes E-Class W214
How to replace the battery of the key for the Mercedes E-Class W214
Mercedes Classe E (2023-2026 / W214) If you own a Mercedes E-Class W214 and want to replace the battery inside the car key yourself, all you have to do is read the following guide and fo…
How to Reset the Service Light on the Mercedes E-Class W214
How to Reset the Service Light on the Mercedes E-Class W214
Mercedes Classe E (2023-2026 / W214) Let's see how to reset the service light on a Mercedes E-Class W214. Turn on the ignition, press the "home" button on the control panel to the left o…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos