Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Cabin Air Filter

Model: Mercedes Classe B MK 1, W245 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Cabin air filter

See other generations:
Video tutorial

The cabin air filter for the car model in question is located in the engine compartment, just below the windscreen, in a central position where the plastic protective grille is fitted; to replace it, open the front bonnet and locate the protective cap of the cabin air filter housing, press it to slide it sideways and remove it to extract the old filter; ensure there are no dirt residues inside the housing and insert the new one (preferably activated carbon) orienting it according to the airflow direction.


Updated on 19 February 2026 by ScegliAuto


Related tutorials

Cabin Air Filter Replacement on Mercedes Classe B W245
Cabin Air Filter Replacement on Mercedes Classe B W245
Mercedes Classe B (2005-2011 / MK 1, W245) In this video tutorial, you will see how to disassemble and replace the cabin air filter or pollen filter on a Mercedes Benz Classe B W245. First, op…
Replacing the cabin air filter on the Mercedes-Benz B-Class W245
Replacing the cabin air filter on the Mercedes-Benz B-Class W245
Mercedes Classe B (2005-2011 / MK 1, W245) To circulate clean air inside the Mercedes-Benz B-Class, a specific filter is installed to trap dirt and dust. To ensure efficiency, replace it every…
Replacing the Air Filter on Mercedes Class B
Replacing the Air Filter on Mercedes Class B
Mercedes Classe B (2011-2019 / MK 2, W246) It is recommended to use filter LX3471. Using a T25 Torx bit, unscrew the screws securing the air filter box cover. Detach the small duct next to the…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos