Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the Car Pump

Model: Mercedes Clk A208, C208, W208 - Years: 1997, 1998, 1999, 2000, 2001, 2002, 2003
Part: Pump

See other generations:
Video tutorial

A pump is a machine that uses moving mechanical parts to transfer fluid material. The pump operates in a closed environment, between the suction pipe and the discharge pipe.

The following guide shows how to replace it in several steps. Once its position is identified, lift the car on that side and remove the wheel for easy access.

After loosening the bolts that hold it in place, you can remove it. The new pump should be fitted by tightening the bolts securely, then reconnect the belt and refit the wheel that was previously removed.


Updated on 19 February 2026 by ScegliAuto


Related tutorials

Replacement of the hydraulic pump for the convertible top of the Mercedes CLK.
Replacement of the hydraulic pump for the convertible top of the Mercedes CLK.
Mercedes Clk (1997-2003 / A208, C208, W208) Today we will discover the main instructions that will allow us to disassemble and replace the hydraulic pump of the Mercedes CLK convertible top. Fi…
Replacing the Fuel Pump Fuse
Replacing the Fuel Pump Fuse
Mercedes Clk (1997-2003 / A208, C208, W208) If the engine struggles to start, the first thing to check is whether fuel is reaching the engine, meaning the pump in the tank should activate when …
Reprogramming Your Car's ECU
Reprogramming Your Car's ECU
Mercedes Clk (1997-2003 / A208, C208, W208) In the following steps of this guide, you will learn how to correctly reset your car's ECU. First, ensure that your vehicle is turned off and disconn…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos