Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Fuel Pump Fuse

Model: Mercedes Clk A208, C208, W208 - Years: 1997, 1998, 1999, 2000, 2001, 2002, 2003
Part: Pump

See other generations:
Video tutorial

If the engine struggles to start, the first thing to check is whether fuel is reaching the engine, meaning the pump in the tank should activate when the ignition is turned on. Usually, you can hear the pump activating in the cabin when the ignition is switched on. If this does not happen, the first thing to check is the integrity of the fuel pump's protection fuse, located in the boot, just in front of the battery.

Remove the load floor cover and access the fuse, replacing it with one of the same rating.


Updated on 19 February 2026 by ScegliAuto


Related tutorials

How do you perform the 40 amp fuse test for the pump in a Mercedes A209 CLK?
How do you perform the 40 amp fuse test for the pump in a Mercedes A209 CLK?
Mercedes Clk (2002-2010 / A209, C209, W209) To test the 40 amp fuse of the pump in a Mercedes A209 CLK (for example, if it refers to the fuel pump or another system pump), here are the general …
How to Replace the Fuel Pump on the Mercedes CLK?
Mercedes Clk (2002-2010 / A209, C209, W209) To replace the fuel pump on the Mercedes CLK, first remove the covers that conceal the fixing screws of the rear seat to loosen these screws and deta…
Replacing the Windscreen Wiper Fuse
Replacing the Windscreen Wiper Fuse
Mercedes Clk (1997-2003 / A208, C208, W208) If the wiper system does not work or the pump located in the washer fluid reservoir does not activate to release water from the nozzles, the first th…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos