Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Classe C
    4. : How to change the power steering pump of the Mercedes C-Class.

Mercedes Classe C - Video tutorial

Model: Mercedes Classe C W203 - Years 2000-2007
Part: Pump
Operation: How to change the power steering pump of the Mercedes C-Class.

Today, in this video tutorial, we will see the steps on how to disassemble and replace the power steering pump of the Mercedes C-Class. First, we open the engine hood of our car and begin by removing the metal partition behind the electric power steering pump; then we remove the belt from the pulley. At this point, we disconnect the tubing from the pump, loosening the clamp screw and removing the hydraulic tubing; all that's left is to install the new original power steering pump, applying the reverse process for reassembly!


Posted on 16 August 2023 by ScegliAuto

    Frequently Asked Questions

    • Classe C 2007-2013 - How much does it cost to replace the water pump in the Mercedes C-Class? Read Answer
    • Classe C 2007-2013 - Where is the high pressure pump located on a Mercedes C-Class? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos