Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Power Steering Pump on a Mercedes C-Class

Model: Mercedes Classe C W203 - Years: 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
Part: Pump

See other generations:
Video tutorial

How to remove the power steering pump on a Mercedes C-Class. Open the hood and secure it, then remove the screws and take off the air intake (as shown in the video).

Locate the part to work on: unscrew the bolts with a socket wrench, being careful not to damage the wiring harness membranes. Lift the car with a column lift and remove the plastic under shield; unscrew all the mounting bolts of the power steering pump.

Once the disassembly is complete, pull the part out of the engine compartment and prepare to install the new part. Insert the new pump into the appropriate housing, screw in the mounting bolts, then tighten the pump bolts.


Updated on 5 March 2026 by ScegliAuto


Related tutorials

Replacing the Fuel Pump on the Mercedes C-Class
Replacing the Fuel Pump on the Mercedes C-Class
Mercedes Classe C (2007-2013 / W204) .. and replace the fuel pump on the Mercedes C-Class. First, open the rear doors and start by removing the rear seat by lifting it up; then remove the.. …
How to Change the Fuel Pump on the Mercedes C-Class
How to Change the Fuel Pump on the Mercedes C-Class
Mercedes Classe C (2000-2007 / W203) .. and replace the fuel pump on the Mercedes C-Class, following the instructions below. First, remove the rear seat of your car, then take off the fuel.. …
How to Remove the Air Pump on Mercedes C-Class
How to Remove the Air Pump on Mercedes C-Class
Mercedes Classe C (2014-2021 / W205) Want to remove the air pump on your Mercedes C300 yourself but don't know how? Let's see in the following video how to take apart the piece: lift the…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos