Do it yourself
Frequently asked questions about cars and motorcycles

Removal and Replacement of the Transfer Case

Model: Mercedes Classe M W163 - Years: 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
Part: Checks and maintenance

See other generations:
Video tutorial

The LOW RANGE TRANSFER CASE MOTOR is a component of four-wheel drive vehicles that allows switching between two and four-wheel drive. You need to work under the car, so you can do this either uncomfortably with the car in a normal position or by raising it on a ramp or with a jack.

To check if the Transfer Case is not functioning, observe that its light on the dashboard flashes when you turn on the ignition and when switching to four-wheel drive. Locate the position of the Transfer Case and proceed with the disassembly.

To do this, unscrew the bolts that secure it in place using the appropriate socket. Once unscrewed, proceed to remove it, and to do this, you must disconnect the cables.

To disconnect the cables, push on the clip that secures the connector and pull. Now you can replace the old part with the new one by reversing the actions we just performed.

You will see that the light on the dashboard no longer flashes. The car on which the maintenance is performed is a Mercedes M-Class.


Updated on 20 February 2026 by ScegliAuto


Related tutorials

Mercedes Classe M (2005-2011 / W164) Today's main instructions will show you how and when to replace the timing chain on a Mercedes M-Class; the manufacturer recommends replacing the cha…
Mercedes Classe M (2005-2011 / W164) Do you want to replace the bulb in the Mercedes ML mirror? This task is not too difficult; here's how to do it. Adjust the mirror or remove it by pri…
Mercedes Classe M (2005-2011 / W164) In this guide, we will see the main instructions on how to disassemble and replace the intercooler radiator of the Mercedes Class M 320 CDI. First, w…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos