Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Manufacturer Emblem

Model: Mercedes Classe E W211 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Manufacturer emblem

See other generations:
Video tutorial

To remove the manufacturer emblem, open the hood. Inside the hood, locate the hole where the emblem is situated.

Hold the emblem in place with your fingers and, using pliers, rotate the locking mechanism counterclockwise. At this point, you can pull the emblem out from its position on the exterior of the hood.

To install the new emblem, insert it into the hole, hold it steady with your fingers, and from the underside of the hood, rotate (with pliers) the locking mechanism clockwise. The vehicle undergoing this maintenance is a Mercedes E-Class.


Updated on 20 February 2026 by ScegliAuto


Related tutorials

Removing and Replacing the Battery
Removing and Replacing the Battery
Mercedes Classe E (1995-2002 / W210) This video shows how to remove and replace the battery in your car. First, locate where the battery is situated in your vehicle; in this case, it is …
How to disconnect the airbag in the Mercedes E-Class
How to disconnect the airbag in the Mercedes E-Class
Mercedes Classe E (2009-2016 / W212) Today, you will learn how to remove the driver-side airbag in the Mercedes E-Class. To perform the removal, get inside the vehicle and rotate the ste…
Replacing Water Recirculation Pump
Replacing Water Recirculation Pump
Mercedes Classe E (2002-2009 / W211) This video shows how to replace the water recirculation pump. First, locate where the pump is situated; in this case, it is located just behind the t…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos