Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Automatic Transmission of the Mercedes W210

Model: Mercedes Classe E W210 - Years: 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002
Part: Warning light – error code

See other generations:
Video tutorial

Today, you will learn the steps to reset the automatic transmission of the Mercedes E-Class, model W210. This maintenance operation is very simple and can be done independently. The first step is to insert the key into the ignition switch and then firmly press the accelerator pedal for 30 seconds.

The second step is to release the pedal after 30 seconds and turn on the vehicle's electrical system. The third and final step is to move the transmission in all directions to set the new guidelines.

Finally, you can turn off the instrument panel.


Updated on 19 August 2026 by ScegliAuto


Related tutorials

Resetting the Oil Change on Mercedes E-Class W210
Resetting the Oil Change on Mercedes E-Class W210
Mercedes Classe E (1995-2002 / W210) Today, learn how to reset the engine oil change interval on a Mercedes E-Class, W210 facelift model (2000-2002). Start the procedure by turning the i…
How to Reset and Learn the Automatic Transmission of the Mercedes E-Class
How to Reset and Learn the Automatic Transmission of the Mercedes E-Class
Mercedes Classe E (2002-2009 / W211) Below are the main instructions on how to reset and subsequently learn the automatic transmission of the Mercedes E-Class. First, get inside the vehi…
How to Reset the Automatic Transmission of the Mercedes E-Class?
How to Reset the Automatic Transmission of the Mercedes E-Class?
Mercedes Classe E (1995-2002 / W210) To reset the automatic transmission of the Mercedes E-Class, turn the ignition key to the first position to power on the instrument cluster. Once the…

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos