Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Slk
    4. : Replacement of the battery for the remote key of the Mercedes SLK.

Mercedes Slk - Video tutorial

Model: Mercedes Slk MK 2, R171 - Years 2004-2011
Part: Battery
Operation: Replacement of the battery for the remote key of the Mercedes SLK.

Today's guide will show us how to disassemble and replace the battery of the Mercedes SLK key remote, in simple and quick steps. First, we take our remote control and start by removing the physical key from inside it; then we remove the battery tray, thus removing the battery inside it, as shown in the video. At this point, we insert the new battery, of the correct type and with the same label, inserting it in the correct direction; then we reassemble the tray onto the remote control and finally the physical key, applying the reverse process!


Posted on 2 October 2023 by ScegliAuto

    Frequently Asked Questions

    • Slk 2011-2016 - Where is the auxiliary battery in the Mercedes SLK 350 located? Read Answer
    • Slk 2011-2016 - Where is the battery of the Mercedes SLK r172 located? Read Answer
    • Slk 2011-2016 - Where is the battery of the Mercedes SLK located? Read Answer
    • Slk 2004-2011 - Where is the battery located on Mercedes SLK? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos