Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Add Antifreeze to Your Car

Model: Mercedes Clk A208, C208, W208 - Years: 1997, 1998, 1999, 2000, 2001, 2002, 2003
Part: Antifreeze coolant

See other generations:
Video tutorial

With the arrival of winter and frost, your car requires attention to avoid compromising its performance. One of these tasks is to fill the radiator with antifreeze.

This prevents the liquid in the radiator from freezing. This type of product can be found in car parts stores.

Once you have purchased the product, open the bonnet and locate the radiator reservoir, disconnecting the hose connected at the bottom. At this point, all the water present in the radiator and the reservoir will drain out. After emptying both tanks and disposing of the spilled liquid, take the antifreeze and begin pouring its contents into the radiator after reconnecting the rubber hose.


Updated on 21 February 2026 by ScegliAuto


Related tutorials

Instructions for Replacing Antifreeze
Instructions for Replacing Antifreeze
Mercedes Clk (1997-2003 / A208, C208, W208) It is common to use regular water to fill the engine cooling system, which generally leads to rust formation that can damage the radiator or water pu…
How do you perform the 40 amp fuse test for the pump in a Mercedes A209 CLK?
How do you perform the 40 amp fuse test for the pump in a Mercedes A209 CLK?
Mercedes Clk (2002-2010 / A209, C209, W209) To test the 40 amp fuse of the pump in a Mercedes A209 CLK (for example, if it refers to the fuel pump or another system pump), here are the general …
Reprogramming Your Car's ECU
Reprogramming Your Car's ECU
Mercedes Clk (1997-2003 / A208, C208, W208) In the following steps of this guide, you will learn how to correctly reset your car's ECU. First, ensure that your vehicle is turned off and disconn…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos