Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the SRS Light on the Mercedes Vito?

Model: Mercedes Vito MK 2, W639 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Warning light – error code

See other generations:
Video tutorial

When the SRS light appears on the instrument cluster of the Mercedes Vito, it indicates a general problem with the airbag system: it is necessary to identify the source of the issue to turn off the light. Connect a diagnostic tool to the vehicle's OBD port, located below and to the left of the steering column: this will help identify the problem and resolve it directly, then reset the error stored in the ECU. This way, you can turn the ignition off and on again, checking that the light is off.


Updated on 2 September 2026 by ScegliAuto


Related tutorials

How to Reset the SRS Light on a Mercedes Vito?
How to Reset the SRS Light on a Mercedes Vito?
Mercedes Vito (2003-2013 / MK 2, W639) The SRS light that appears on the instrument panel of the Mercedes Vito illuminates to indicate a generic fault in the vehicle's restraint systems: y…
How to Reset the SRS Light on a Mercedes Vito?
How to Reset the SRS Light on a Mercedes Vito?
Mercedes Vito (2003-2013 / MK 2, W639) When the SRS (Supplemental Restraint System) light appears on the dashboard of a Mercedes Vito, it indicates a fault in the passive safety system (ai…
How to Reset the Service Light on a Mercedes Vito
How to Reset the Service Light on a Mercedes Vito
Mercedes Vito (2003-2013 / MK 2, W639) To reset the service light on a Mercedes Vito, follow this procedure: turn on the ignition without starting the engine, then press the 'm' button loc…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos