|
Do it yourself
| |||
| ||||
How to Remove the Starter Motor from a Mercedes C-Class W204
Model: Mercedes Classe C
W204
- Years 2007-2013
In this video, see how to remove the starter motor from a Mercedes C-Class. First, always disconnect the battery, at least the negative terminal. Next, remove the air connector to create space for working, along with the filters located above the main control unit, such as the engine air filter. Once you reach this area, there are electrical connectors to remove, and then you need to take out the DPF, which is a challenging task. However, our YouTuber does not describe it in detail, just briefly. Remove one clamp, and from under the vehicle, take out two or three screws to remove the DPF, being careful not to damage the exhaust sensors. You can then remove the plate connected to the DPF. This allows you to see the starter motor, which, as if it weren't difficult enough, is not easy to remove at all. It is held by two bolts that must be removed after disconnecting the electrical wires.
Updated on 5 September 2026 by ScegliAuto
Video tutorial
Related tutorials
Mercedes Classe C
(2007-2013 /
W204)
.. remove the starter motor from a Mercedes-Benz C-Class W204: the component is located under the engine block, in a not very accessible place, although.. …
Mercedes Classe C
(2007-2013 /
W204)
Today, you will see the main instructions on how to remove and replace the starter motor on the Mercedes C-Class 250. First, lift the vehicle and sta…
Mercedes Classe C
(2007-2013 /
W204)
Let’s briefly go through the guide on how to remove and replace the starter motor on a Mercedes C-Class, following the instructions below. First, ope…
Other guides you may be interested in
|
Where is the Spare Wheel in the Peugeot 5008?
This video shows where the spare wheel is located in the Peugeot 5008 and how to access it, useful in case of a puncture. As shown, the wheel is not in the usual boot compartment but underneath it, outside the vehicle. To free the wheel, first gather the tools provided, then open the boot, locate the small indicated hatch, and open it. Next, loosen the bolt just released using the large socket wrench enough to lower the wheel to the ground. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.130
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |