Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Classe C
    4. : How to restore the service indicator on the Mercedes C300.

Mercedes Classe C - Video tutorial

Model: Mercedes Classe C W205 - Years 2014-2021
Part: -board computer
Operation: How to restore the service indicator on the Mercedes C300.

In this video, we are shown how to reset the service indicator on the Mercedes C-Class 300 W205. The procedure is similar to most modern Mercedes cars. To perform this procedure, first start the instrument cluster. After starting the instrument cluster, simultaneously press the OK button and the phone button for about 5 seconds. A menu will now appear. Use the arrow keys to scroll through the menu until you reach the ASSYST PLUS option. Once selected, scroll to the complete service option and select it again using the OK button. Now, select the type of engine oil that was used for the car's service, and confirm that you want to reset the indicator. The procedure is now complete, and you can return to the main screen using the appropriate button.


Posted on 23 February 2024 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Classe C 2014-2021 - What does the check engine light on Mercedes C-Class signal? Read Answer
    • Classe C 2014-2021 - What does the Mercedes C200 restraint system warning light mean? Read Answer
    • Classe C 2014-2021 - Where can I find the navigation updates of the Mercedes C-Class W204? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos