Do it yourself
Frequently asked questions about cars and motorcycles

Replacing the Diesel Fuel Filter on the Mercedes A-Class W176

Model: Mercedes Classe A W176 - Years 2012-2018
Part: Diesel fuel filter

In this video, learn how to replace the diesel fuel filter on the Mercedes A-Class W176. Open the hood and locate the filter on the passenger side, near the windshield. Disconnect the electrical connector, then use a 8mm Torx socket wrench to remove the two screws that secure the clamp holding the filter. Using a screwdriver, loosen the clamps that secure the two hoses. Place a rag under the filter to catch any diesel fuel that may spill from the hoses, and carefully pull them out of the rubber holders, using the screwdriver as needed. Position the new filter, remove the rag, insert the hoses, and tighten the clamps with the appropriate pliers. Reattach the clamp and secure it with the screws, then reconnect the electrical connector. Turn the ignition on and off several times to fill the fuel system.

Updated on 16 September 2026 by ScegliAuto

Video tutorial

Related tutorials

Mercedes Classe A (2012-2018 / W176) This guide shows how to replace the fuel filter on the Mercedes Benz A-Class 180 CDI W176. The fuel filter is located in the engine compartment near …
Mercedes Classe A (2012-2018 / W176) .. replace the engine air filter in your Mercedes A-Class W176, follow these steps to complete the task independently and without difficulty. First, turn.. …
Mercedes Classe A (2012-2018 / W176) .. this guide for all of you who own a Mercedes A-Class W176, we will explain how to safely access the engine air filter. First, turn off the vehicle completely.. …

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos