Do it yourself
| ||||
|
Mercedes Sprinter - Video tutorial
Model: Mercedes Sprinter
Br910, MK 3, Br907
- Years 2018-2024 If one of the headlights of the Mercedes Sprinter needs to be changed, let's see how to proceed. Open the hood of the engine compartment and position yourself in front of the headlight of the bulb to be changed. Inside the headlight, we will find rubber caps that protect the bulb and that we will remove. The cover closest to the radiator is for the low beam. Once the cover is removed, disconnect the connector and rotate the bulb to remove it. Insert the new one, rotate it to lock it in place, and reconnect the connector and the cover. For the high beam bulb, the procedure is similar except that to remove the bulb, we use a pair of pliers and pull with force on the bulb pin, and to insert it, we push until we hear a click. When handling new bulbs, remember not to touch the bulb with bare fingers.
Posted on 11 April 2024 by ScegliAuto
Other guides that may interest you
|
How to reset the Jeep Renegade Passive Entry lightThe guide shows how to reset the Passive Entry system, stylized by a key shaped light with three lines of WiFi is shown next to the mileage. This system allows the vehicle to be switched on without having to use the supplied keys. The reset must be performed keeping the keys inside the vehicle. In fact, with the instrument panel off, it will be necessary to press the ignition button located on the keys and then the brake pedal. At this point it is necessary to press the power button on the dashboard. At this point, wait five minutes before starting the vehicle normally. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.073
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |