Do it yourself
| ||||
|
Mercedes 190 - Video tutorial
Model: Mercedes 190
W201
- Years 1982-1993 Replacing the water radiator and coolant thermostat will be very simple if you follow our video guide. The first thing to do is to open the engine compartment and loosen the clamp on the upper flexible coolant hose. Once loosened, you can disconnect part of the hose, allowing you to remove the fan housing, clean the area, and install a new one. After installing the new fan, you can tighten the clamp on the lower flexible coolant hose. Now we can move on to removing the thermostat, first remove the connection cable with a 10mm wrench and then unscrew the top part. Clean the mounting seat of the thermostat housing and install the new one. Finish by tightening the clamp on the expansion tank's flexible hose.
Posted on 23 April 2024 by ScegliAuto
Other guides that may interest you
|
How to open the Piaggio Beverly saddle with a flat batteryIn today's video we see how to open the Piaggio Beverly saddle in case the service battery has run out. First we proceed by opening the compartment on the shield, using the appropriate key. Inside we will find a lever that we will have to pull; at the same time we proceed to unhook the saddle, lifting it. These two operations together, with a little elbow grease, will allow you to open the saddle in cases of extreme need. In fact, we recommend carrying out this operation only if strictly necessary, otherwise it could compromise the correct functioning of the mechanism in the long run. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.021
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |