Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Dashboard of the Mercedes A-Class

Model: Mercedes Classe A W168 - Years: 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004
Part: Dashboard

See other generations:
Video tutorial

First, disconnect the battery terminals to protect all electronic devices. Then, while seated in the driver's position, pull towards you the plastic panel at the base of the steering column.

This will give you access to the screws that secure the center display of the dashboard. Remove these screws to take off the upper part that shields the display from sunlight.

Next, remove the screws located at the bottom to pull out the entire speedometer display. Disconnect the plugs at the back, and you're done!


Updated on 25 February 2026 by ScegliAuto


Related tutorials

How to Remove the Instrument Cluster from a Mercedes A-Class Dashboard
How to Remove the Instrument Cluster from a Mercedes A-Class Dashboard
Mercedes Classe A (2004-2012 / W169) .. cluster from the dashboard of the Mercedes A-Class, as well as the B-Class. First, get inside the cabin and start by releasing the instrument cluster.. …
Replacing the Instrument Cluster Display on a Mercedes-Benz A-Class
Replacing the Instrument Cluster Display on a Mercedes-Benz A-Class
Mercedes Classe A (2004-2012 / W169) .. replacing the LCD display on a Mercedes-Benz A-Class. First, get inside the cabin and start removing the instrument cluster from the dashboard by unscrewing.. …
How to Remove the Instrument Cluster from the Mercedes A-Class
How to Remove the Instrument Cluster from the Mercedes A-Class
Mercedes Classe A (2004-2012 / W169) .. replace the instrument cluster of the Mercedes A-Class. First, get inside the vehicle and use a thin, pointed tool to insert into the small side holes.. …

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos