Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Thermostat on a Mercedes-Benz B-Class

Model: Mercedes Classe B W245, MK 1 - Years 2005-2011
Part: Thermostat

For this operation, it will be necessary to disconnect the battery terminals to protect any delicate circuits. Then, lift the bonnet. Next, locate the air duct in the engine to remove it by simply releasing the clips that hold it in place. Now, identify the sensor in question, which is located at the point indicated in the video. Disconnect the socket and remove the screws or bolts securing it to extract and replace it. Then, retrace the steps in reverse for reassembly.

Updated on 26 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Thermostat of the Mercedes B-Class 200?
How to Replace the Thermostat of the Mercedes B-Class 200?
Mercedes Classe B (2011-2019 / W246, MK 2) .. and replace the thermostat of the Mercedes B-Class 200. First, raise the vehicle and begin draining the engine coolant by disconnecting the radiator.. …
How to replace the thermostat of the Mercedes B-Class
How to replace the thermostat of the Mercedes B-Class
Mercedes Classe B (2005-2011 / W245, MK 1) .. and replace the thermostat of the Mercedes Class B with a diesel engine. First of all, we open the hood of the car and start disassembling and removing.. …
How to Replace the Thermostat on a Mercedes-Benz B-Class 200
How to Replace the Thermostat on a Mercedes-Benz B-Class 200
Mercedes Classe B (2005-2011 / W245, MK 1) Before starting, open the bonnet to access the engine compartment. Remove the air filter and its housing by unscrewing the screws that secure it, the…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos