Do it yourself
Frequently asked questions about cars and motorcycles

Replacing the Ignition Coil in Your Car

Model: Mercedes Classe C W204 - Years 2007-2013
Part: Ignition coil

To replace the ignition coil in your car, open the hood, remove the cover on the engine secured by screws or clips depending on your situation. Next, remove the rubber grommets covering the coil, and then remove the pins with the appropriate wrenches. After completing these steps, use your fingers to apply force on the piece, wiggling it left and right, and pull it upward. Now take the new coil and insert it into place, secure it with the pins, position the rubber grommet on top of the piece, then reassemble everything, and your repair is complete.

Updated on 26 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Mercedes Classe C (2000-2007 / W203) In this video, you will see how to replace the ignition coil on a Mercedes C-Class W203. Start by opening the hood, then loosen the three screws of t…
Mercedes Classe C (2014-2021 / W205) Replacing the spark plugs on a Mercedes-Benz C-Class W205 or W206 requires attention but can be done by an enthusiast. First, ensure the engine is co…
Mercedes Classe C (2000-2007 / W203) Replacing damaged spark plugs on a Mercedes C-Class? Let's see how to remove the spark plugs. Open and lift the hood, then remove the soundproofing p…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos