Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Classe C
    4. : Removing the spark plugs on Mercedes C-Class

Mercedes Classe C - Video tutorial

Model: Mercedes Classe C W203 - Years 2000-2007
Part: Spark plugs
Operation: Removing the spark plugs on Mercedes C-Class

Does our Mercedes C-Class have ignition problems? Let's see the disassembly of the car spark plugs. Let's open the bonnet and lift it, let's put it in safety. We disassemble the plastic panel covering the cylinder head, disconnect the power supply terminals from each coil. We remove the screws of the coils on the engine head. Immediately afterwards we unscrew the candles with a socket wrench, take them out of the head. We take the new spark plugs and accompany them with the socket wrench extension in the engine head, tighten them and connect the power coils to each spark plug. We connect the electrical terminals and mount the panel.


Posted on 30 November 2023 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos