Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you reset the Service light on the MG ZS?

Model: MG ZS Zs11 - Years 2017-2024
Part: Service warning light

It will be possible to make the Service light disappear from the instrument panel of the MG ZS by turning it on after inserting the ignition key into the corresponding slot: once the panel has been turned on, it will be possible to move using the arrow keys on the right side of the steering wheel. When the "Next maintenance" message appears, it will be necessary to select it with the OK button and access the next screen with the remaining kilometers until the maintenance: by holding down the OK button, it will be possible to make the light disappear and finally turn off the instrument panel.

Posted on 7 April 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on the MG ZS?
How to Reset the Service Light on the MG ZS?
MG ZS (2017-2024 / Zs11) Learn how to clear the service light on the MG ZS quickly, easily, and DIY, without using any external diagnostic tools. After turning on the ignitio…
How do you reset the Service light on the MG ZS?
How do you reset the Service light on the MG ZS?
MG ZS (2017-2024 / Zs11) To completely remove the Service light from the instrument panel of the MG ZS, you will need to turn on the instrument panel by inserting the ignitio…
How do you reset the Service light on the MG ZS?
How do you reset the Service light on the MG ZS?
MG ZS (2017-2024 / Zs11) It will be possible to reset the Service light that is displayed on the instrument panel of the MG ZS by connecting a diagnostic tool to the vehicle'…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos