Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the tire pressure on an MG HS

Model: MG HS MK 1 - Years 2019-2026
Part:

Let's see how to reset the tire pressure warning light on the MG HS: turn on the instrument panel and locate the reset button, which is located under the steering wheel, on the side panel of the dashboard; on some versions it may also be in the glove compartment. Once found, press and hold it until the yellow tire pressure warning light on the dashboard flashes two or three times. After this, the light should turn off. This indicates that the system has started the recalibration process and has forgotten the old values. Complete the recalibration by driving for 5/10 minutes at a speed above 25 km/h. If the light comes back on, it means that the tire is damaged, or one of the sensors is faulty.

Posted on 27 October 2025 by ScegliAuto

Video tutorial

Related tutorials

How do you reset the tire pressure warning light on the MG HS?
How do you reset the tire pressure warning light on the MG HS?
MG HS (2019-2026 / MK 1) In order to reset the tire pressure warning light on the MG HS, you first need to inflate the tires to the correct pressure value: this value is indi…
How do you reset the tire pressure warning light on the MG HS?
How do you reset the tire pressure warning light on the MG HS?
MG HS (2019-2026 / MK 1) To reset the tire pressure warning light that appears on the instrument panel of the MG HS, first you will need to inflate the tires to the correct p…
How to reset the TPMS light on the MG HS
How to reset the TPMS light on the MG HS
MG HS (2019-2026 / MK 1) Today we will explain how to reset the tire pressure warning light on an MG HS car. Unlike many other vehicles, on this type of car it is not necessa…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos