Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the tire warning light on the MG ZS 2.

Model: MG ZS MK 2 - Years 2024-2026
Part:

Manually resetting the tire warning light on the instrument panel of your second-generation MG ZS is really simple. All you need to do is carefully read the following guide and follow the step-by-step procedure. First, inflate all the tires of the car to the pressures indicated by the manufacturer, then enter the cabin and reach the driver's seat. At this point, insert the key and press and hold the button located in the lower area of the dashboard, which has the TPMS warning light depicted on it. Once the reset is complete, release the button.

Posted on 3 January 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you reset the tire pressure warning light on the MG ZS?
How do you reset the tire pressure warning light on the MG ZS?
MG ZS (2017-2024 / Zs11) On the instrument panel of the MG ZS, the tire pressure warning light that appears can be reset by inflating the tires to the correct pressure value:…
How do you reset the tire pressure warning light on the MG ZS?
MG ZS (2017-2024 / Zs11) It will be possible to completely remove the Service light from the instrument panel of the MG ZS by inflating the tires until they are brought back …
How to reset the tire pressure warning light on the MG ZS
How to reset the tire pressure warning light on the MG ZS
MG ZS (2017-2024 / Zs11) The illumination of the tire pressure warning light on the instrument panel indicates a possible loss of pressure or puncture in one or more tires; l…

Other guides you may be interested in

Installation of Upgraded Intercooler Radiator with Pipes

Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille.

Watch the video!


by ScegliAuto

More videos