Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change the engine oil on the Mg Hs

Model: MG ZS Zs11 - Years 2017-2024
Part: Engine oil

Do we want to proceed with replacing the engine oil and oil filter on our car? In the description below, we find all the useful steps and necessary information to carry out the operation correctly. Lift the car and locate the oil drain plug and proceed to unscrew it after placing a container underneath. Take the appropriate key to unscrew the oil filter and replace it with the new one. Then proceed to screw the drain plug back in and then proceed from above the engine compartment, unscrew the fill plug and fill the system with the new oil.

Posted on 4 June 2023 by ScegliAuto

Video tutorial

Related tutorials

How to change engine oil on Mg Zs
How to change engine oil on Mg Zs
MG ZS (2017-2024 / Zs11) Let's see in this guide the instructions that will allow us to replace the engine oil and the oil filter, carrying out the ordinary maintenance coupo…
How to replace the oil filter and motor oil of the MG ZS
How to replace the oil filter and motor oil of the MG ZS
MG ZS (2017-2024 / Zs11) To perform the oil change and oil filter replacement on an MG ZS car, it is necessary to lift the vehicle on a jack or use suspension stands. After l…
How to change the timetable of the MG ZS
How to change the timetable of the MG ZS
MG ZS (2017-2024 / Zs11) Today we will see, in this short and simple guide, how to change the time of the MG ZS, following the instructions below. First of all, we get on boa…

Other guides you may be interested in

Installation of Upgraded Intercooler Radiator with Pipes

Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille.

Watch the video!


by ScegliAuto

More videos